All the scanners are accessible in the TradePoint Desktop Pro version.

As we check, it is working fine at our end. Below is the screenshot for your reference:

Could you kindly provide a screenshot to help us assist you further?

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

We request you to kindly check now.

The Definedge Securities wallet points are set off against brokerage. In order to check details, kindly login to https://myaccount.definedgesecurities.com/ -> Wallet -> click on the "Points Earned" option.

Yes, it is possible to place SL-LMT order in the GTT section.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

We provide intraday data for approximately 6 months by default. However, if you have installed TradePoint for more than 6 months, you might get data for a longer duration.

We have taken a note of your requirement and forwarded it to the concerned team.

We provide intraday data for approximately 6 months by default. However, if you have installed TradePoint for more than 6 months, you might get data for a longer duration.

Could you please specify the symbol and time frame?

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team. For now, you get similar functionality using our "Intraday Action Watch" feature.
With Intraday Action Watch, you have the option to select specific conditions related to camarilla levels and unselect other parameters.

Kindly allow us sometime, we are looking into this.

In case you are still experiencing login issues, please connect with us at 020-61923200/[email protected]

We would like to inform you that you have made payment for RZone (https://tradepoint.definedge.com) integrated with Definedge Solutions. In order to access RZone integrated with Definedge Securities (https://zone.definedgesecurities.com) you will require different subscription. Our team will connect with you shortly to explain further process.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

You can click on the "Recent" button at the top-left corner of the screen.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team, they will evaluate its feasibility.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Please check now

As of now, it is not possible. However, we have taken note of your requirement and forwarded it to the concerned team. They are currently evaluating its technical feasibility.

Please check now.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Please DM your contact number so that someone from the team can connect with you

You are not able to see USDINR chart as you have not opted for the currency segment
To add a new segment for trading, you need to follow the re-kyc process.
Kindly login to https://rekyc.definedgesecurities.com/directpan.aspx with your UCC and OTP -> select "New Segment Addition" and proceed further.

Realtime scanners are available in TradePoint Desktop integrated with Definedge Securities.
Scanners -> RealTime Scanners -> Ultra Scanner

SIP orders are executed at 12 noon on a trading day

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

As of now, Stock SIP feature is available only on the Zone mobile app.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Someone from the team will connect with you shortly.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Real-time data in Tradepoint integrated with Definedge Solutions is only available for FNO (Futures and Options). However, with Demat account, you can access real-time data for all market segments, including NSE, BSE, MCX, and CDS.
Below is the link that can be referred for in-depth knowledge of the Breadth Indicator:
https://shelf.definedgesecurities.com/relative-strength-studies/matrix-and-reports/breadth-rs-seasonality/
However, this particular link can be accessed with the login credentials of Demat account.

Kindly share your PAN details and mobile number via Dm or write to us at [email protected]

In a scenario where you have an existing active subscription and you buy another one, the new subscription will be placed in a pending status. It will only become active once your current subscription reaches its expiration.

Yes, 15th August is the last date to avail Independence Day offer.

Margin requirement is determined by the exchange.

@Tushar-Patil Kindly share your UCC via DM or write to us at [email protected], so that we can specifically check the issue you are facing.

@Vandana-Sharma Thank you for your feedback. It is under progress, till then you can split the lots into a new position for the same option with the respective number of lots and square that off.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team. They will evaluate its feasibility.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team. They will evaluate its feasibility.

The team is currently looking into it. However, it appears to be a rare occurrence that is limited to this particular scrip (Britannia) for a specific date (January 27, 2023).

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team. They are currently evaluating its feasibility.

Thank you for the suggestion. We have taken note of it and forwarded it to the concerned team.

Kindly allow us sometime, we are looking into this. We will get back to you with an update at the earliest.

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team.

We have replied to your query over email. Please check

As per your description, we checked the same and it is working fine at our end. If you are still facing the issue, kindly get in touch with us at 020 61923200.

For product subscriptions, you need to add funds in Equity Cash/Futures and Options segment.

You can follow the below path:
Login to https://zone.definedgesecurities.com/ -> RZone -> Breadth -> Breadth Chart -> select P&F Bullish Percent from the dropdown

Currently, the mentioned feature is not available in TradePoint Desktop. We have taken note of your requirement and have forwarded to the concerned team. We will get back to you with an update at the earliest.

For now, you can follow the below steps to add market breadth charts in Point & Figure:

1. In TradePoint terminal Select the preferred Breadth scanner
2. Select Preferred Market Segment > Preferred group > Chart Input type > Time range >Scan to plot the breadth indicator
3. Right-click on the Breadth Line chart > Export to CSV
4. Store the CSV file in MyMkt file of TradePoint folder > Change Date format according to the MyMkt date format.
5. To check MyMky date format > Setting > manage data > MyMkt ( EOD date format )
6. Save the file & Close it.
7. Select P&F chart chose market segment as MyMkt > Scrip name as CSV file name > Press Ok
8. You will be able to see Breadth indicator values in P&F chart format.

We will make this simpler and make breadth chart data readily available in P&F and Renko format.
Bullish % will be available on the desktop soon. This feature is currently available in the RZone (web version).

Thank you for your feedback. We have taken note of it and forwarded it to the concerned team. They are currently evaluating its feasibility.

Thank you for your suggestion. We have taken note of it and have forwarded it to the concerned team. We will get back to you with an update at the earliest.

The system scans only current and previous bricks. Also, it does not scan historical crossovers. In order to investigate further, it would be better if you allow the team to check your system via AnyDesk

We have noted down your concern and the same has been reported to the concerned team. We will get back to you with an update at the earliest.

Thank you for your suggestion. We have taken note of it and have forwarded it to the concerned team. We will get back to you with an update at the earliest.

We made an attempt to contact you on your registered mobile number regarding your concern, but we were unable to connect. Please verify that the MA type in the system and chart are same (either EMA or SMA).
We wanted to confirm this, hence tried to get in touch with you.
If you have any further queries you can reach us at 020-61923200.

Someone from the team will connect with you shortly as we need a clear understanding of the issue you are facing while using the system.

You can add commentary in Indicator/Pattern Preference from Patterns for Renko and save to get it by default every time when you open Renko chart from Scanner results directly.|

Please Note: This can be done for every chart type.

It is possible in TradePoint Desktop trading terminal, while in TradePoint Desktop analysis platform does not offer this functionality.

We have noted down your suggestion and the same has been forwarded to the concerned team.

The contract size of Gold is 100 grams, and the price quotation is 10 grams.
Below is the link for your reference:
https://www.mcxindia.com/docs/default-source/products/contract-specification/gold-mini/gold-mini-august-2022-contract-onwards.pdf?sfvrsn=bc651491_0